首頁 > 網路及系統設定指南 > 監視與設定印表機 > 透過telnet進行遠端維護 > etherconfig
使用「etherconfig」命令檢視並設定乙太網路參數。
檢視設定
msh> etherconfig
指定乙太網路速度
msh> etherconfig speed {auto|10f|10h|100f|100h}
auto=自動選擇
10f=10 Mbps 全雙工
10h=10 Mbps 半雙工
100f=100 Mbps 全雙工
100h=100 Mbps 半雙工
預設值為「自動」。