ManualsContentsPreviousNext |
This section describes how to remove jammed paper.
The fusing section of this machine might be very hot. Caution should be taken when removing misfed paper.
When removing jammed sheets, take care to touch only those areas explicitly indicated in the manual.
Do not remove the fusing unit. Doing so will result in loss of print quality.
If paper becomes jammed inside the decurler or after being fed through it, any prints that are already finished will be output to the decurler's purge tray.
Inside the finisher, or inside the front cover, there is a sticker explaining how to remove misfed paper.
If a detailed removal instruction appears on the right of the screen, follow it.
You can also use the procedure indicated in [System Status] to remove jammed paper.