lpr
When specifying a printer by IP address
c:> lpr -Sprinter's IP address [-Poption] [-ol] \path\file name
When using a host name instead of an IP address
c:> lpr -Sprinter's host name [-Poption] [-ol] \path\file name
When printing a binary file, add the "-ol" option (lowercase O, and lowercase L).
When using a printer with the host name "host" to print a PostScript file named "file 1" located in the "C:\PRINT" directory, the command line is as follows:
c:> lpr -Shost -Pfiletype=RPS -ol C:\PRINT\file1
Printing from the virtual printer
C:\>lpr -S "printer's IP address" –P "virtual printer name" [-ol] \path\file name
"=", ",", "_", and ";" cannot be used for filenames. File names will be read as option strings.
If personal authentication (Basic, Windows, LDAP, or Integrated Server Authentication) is enabled, only authenticated users (users authenticated by login user name and password) can log on.
For "mput" command, "*" and "?" can be used as wild cards in file names.
When printing a binary file in ASCII mode, print may not come out correctly.
For details about login user name and password, see Security Reference, which is the administrator's manual.
For details about the virtual printer configuration, see "Setting the Virtual Printer".
For details about PDF direct print precautions, see "PDF Direct Print Precautions".
