Skip headerPro 907/Pro 1107/Pro 1357
ManualsContentsPreviousNextHelp

bonjour

Use the "bonjour" command to display Bonjour-related settings.

View settings

Bonjour settings are displayed.

msh> bonjour

Bonjour service name setting

You can specify the Bonjour service name.

msh> bonjour cname "computer name"

  • The computer name can be entered using up to 63 alphanumeric characters.

  • If you do not specify a character string, the current setting is displayed.

Bonjour Installation location information setting

You can enter information about the location where the printer is installed.

msh> bonjour location "location"

  • Information about location can be entered using up to 32 alphanumeric characters.

  • If you do not specify a character string, current setting is displayed.

Resetting the computer name and location information

You can reset the computer name and location information.

msh> bonjour clear {cname|location}

  • cname: Reset the computer name. The default computer name will be displayed when the computer is restarted.

  • location: Reset the location information. The previous location information will be deleted.

Interface configuration

msh> bonjour linklocal "interface_name"

  • If you do not specify an interface, the Ethernet interface is selected automatically.

  • If many types of interface are installed, configure the interface that communicates with linklocal address.

  • If you do not specify an interface, the Ethernet interface is automatically selected.

Interface

Interface configured

ether

Ethernet interface

Note