Skip headerPro 907/Pro 1107/Pro 1357
ManualsContentsPreviousNextHelp

Top Page > Network and System Settings Guide > Connecting the Machine > Using Utilities to Make Network Settings > Interface Settings (Printer)

Interface Settings (Printer)

This section describes how to make Interface settings (Printer) using utilities.

The IEEE 802.1X authentication function is not available for a print network.

Although the settings for IEEE 802.1X are displayed on the operation panel and Web Interface, they cannot be configured.

On the printed list of settings, the settings for IEEE 802.1X will always be shown as [Inactive].

Change settings by using the Web Interface.

[Network] image [IPv4] image "Active"

  • Web Interface: Can be used for specifying the setting.

[Network] image [IPv4] image "Inactive"

  • Web Interface: Can be used for specifying the setting.

[Network] image [IPv4 Address]

  • Web Interface: Can be used for specifying the setting.

[Network] image [Subnet Mask]

  • Web Interface: Can be used for specifying the setting.

[Network] image [IPv4 Default Gateway Address]

  • Web Interface: Can be used for specifying the setting.

[Network] image [IP Address Setting Method] image "Auto-Obtain (DHCP)"

  • Web Interface: Can be used for specifying the setting.

[Network] image [IP Address Setting Method] image "Specify"

  • Web Interface: Can be used for specifying the setting.

[Network] image [IPv6] image "Active"

  • Web Interface: Can be used for specifying the setting.

[Network] image [IPv6] image "Inactive"

  • Web Interface: Can be used for specifying the setting.

[Network] image [IPv6 Address]

  • Web Interface: Can be used for specifying the setting.

[Network] image [Manual Configuration Address]

  • Web Interface: Can be used for specifying the setting.

[Network] image [Stateless Address Autoconfiguration] image "Active"

  • Web Interface: Can be used for specifying the setting.

[Network] image [Stateless Address Autoconfiguration] image "Inactive"

  • Web Interface: Can be used for specifying the setting.

[Network] image [HTTP Port Number]

  • Web Interface: Can be used for specifying the setting.

[Network] image [DDNS Configuration] image "Active"

  • Web Interface: Can be used for specifying the setting.

[Network] image [DDNS Configuration] image "Inactive"

  • Web Interface: Can be used for specifying the setting.

[Network] image [Domain Name] image [Auto-Obtain (DHCP)]

  • Web Interface: Can be used for specifying the setting.

[Network] image [Domain Name] image "Specify"

  • Web Interface: Can be used for specifying the setting.

[Network] image [DNS Server IPv4 Address] image [Auto-Obtain (DHCP)]

  • Web Interface: Can be used for specifying the setting.

[Network] image [DNS Server IPv4 Address] image "Specify"

  • Web Interface: Can be used for specifying the setting.

[Network] image [DNS Server IPv6 Address]

  • Web Interface: Can be used for specifying the setting.

[Network] image [Host Name]

  • Web Interface: Can be used for specifying the setting.

TopPreviousNext
Copyright (C) 2010