Tray 6 (with the optional Wide Large Capacity Tray)

The paper sizes you can set for Tray 6 (with the optional Wide LCT) are as follows:

• [Auto Detect]

• A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS, SRA3, SRA4,

  310×432 mm, 226×310 mm, 210×340 mm, 13×19¹/₅, 13×19, 13×18,

  12³/₅×19¹/₅, 12³/₅×18¹/₂, 12×18, 11×17, 11×15, 11×14, 10×15,

  10×14, 8¹/₂×14, 8¹/₂×13, 8¹/₂×11, 8¹/₄×14, 8¹/₄×13, 8×13,

  8×10, 7¹/₄×10¹/₂, 5¹/₂×8¹/₂, 8K, 16K

• A4, A5, B5 JIS, SRA4, 226×310 mm, 182×210 mm,

  170×210 mm, 8¹/₂×11, 7¹/₄×10¹/₂, 5¹/₂×8¹/₂, 16K

• [Custom Size]

You can specify a custom size of between 139.7 - 330.2 mm (5.5 - 13.0 inches) vertically, and between 139.7 - 487.7 mm (5.5 - 19.2 inches) horizontally.

You can specify a custom size between 100.0 - 139.7 mm (3.94 - 5.5 inches) horizontally. To use the custom size paper, additional setup is required. For details, contact your service representative.

The default setting is Auto Detect.

You can set the display so you can see what type of paper is loaded in the paper tray.

This information is used to automatically select the paper tray.

The paper types you can set for Tray 6 (with the optional Wide LCT) are as follows:

[Do not Display], [Recycled Paper], [Special Paper], [Color Paper 1] ([Colour Paper 1]), [Color Paper 2] ([Colour Paper 2]), [Letterhead], [Translucent Paper], [Preprinted Paper], [Bond Paper], [Cardstock], [OHP (Transparency)], [Prepunched Paper], [Coated Paper], [Tab Stock]

The default setting for "Paper Type" is Do not Display.

The optional tab sheet holder is required when using tab stock in Tray 6.

The Tab Position Shift can be set in millimeters, when Tab Stock has been selected.

The Tab Position Shift can be set in 1 millimeter /1 inch units, within a range of 0 to 15 mm (0 to 0.6 inches). The default is 13 mm (0.5 inches).

The paper thicknesses you can set for Tray 6 (with the optional Wide LCT) are as follows:

• Plain Paper

  52 - 105 g/m² (14 - 28 lb BOND)

• Middle Thick

  106 - 163 g/m² (28 lb BOND - 90 lb INDEX)

• Thick Paper 1

  164 - 216 g/m² (90 lb INDEX - 80 lb COVER)

• Thick Paper 2

  217 - 256 g/m² (80 lb COVER - 140 lb INDEX)

The default setting is Plain Paper.

For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.

For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.