Skip headerPro 907/Pro 1107/Pro 1357
ManualsContentsPreviousNextHelp

Programming the Realm

This section describes how to program the Realm.

  1. Press the [User Tools] key.

  2. Press [System Settings].

  3. Press [Administrator Tools].

  4. Press [Down arrow keyNext].

  5. Press [Program / Change / Delete Realm].

  6. Check that [Program / Change] is selected.

  7. Press [*Not Programmed].

  8. Press [Change] to the right of "Realm Name".

    Operation panel screen illustration

  9. Enter the realm name, and then press [OK].

    Enter the realm name, or host name.

    You can enter a realm name using up to 64 characters.

  10. Press [Change] to the right of "KDC Server Name".

  11. Enter the KDC server name, and then press [OK].

    Enter the KDC server name, host name, or IPv4 address.

    You can enter a KDC server name using up to 64 characters.

  12. Press [Change] to the right of "Domain Name".

  13. Enter the domain name, and then press [OK].

    Enter the domain name or host name.

    You can enter a domain name using up to 64 characters.

  14. Press [OK].

  15. Press [Exit].

  16. Press the [User Tools] key.