Network

Specify the printer's IPv4 network address.

The default setting is Auto-Obtain (DHCP).

When you select [Specify], enter the IPv4 address and subnet mask as "xxx.xxx.xxx.xxx" ("x" indicates a number).

When you select [Specify], make sure that IPv4 address is different from that of other printer on the network.

The physical address (MAC address) also appears.

A gateway is a connection or interchange point between two networks.

Specify the gateway address for the router or host computer used as a gateway.

The default setting is 0.0.0.0.

Displays the printer's IPv6 network address.

• Link-local Address

  The printer's specified link-local address appears.

• Manual Configuration Address

  The printer's manually configured address appears.

• Stateless Address: 1-5

  The specified stateless address appears.

Displays the printer's IPv6 gateway address.

Specify IPv6 Stateless Address Autoconfiguration.

The default setting is Active.

Make settings for the DNS server.

The default setting is Auto-Obtain (DHCP).

When you select [Specify], enter the DNS Server IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a number).

Specify the DDNS settings.

The default setting is Active.

Specify the printer's IPsec function Active/Inactive.

The default setting is Inactive.

Specify the domain name.

The default setting is Auto-Obtain (DHCP).

When you select [Specify], enter the domain name using up to 63 characters.

Specify the WINS server settings.

The default setting is On.

If [On] is selected, enter the WINS Server IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a number).

If DHCP is in use, specify the Scope ID. Enter a Scope ID using up to 31 characters.

Select the Protocol to use in the network.

The default setting for "IPv4" is Active.

The default setting for "IPv6" is Inactive.

The default setting for "SMB" is Active.

Specify the SMB computer name.

Enter the computer name using up to 15 characters.

"*+,/:;<>=?[\]|. and spaces cannot be entered.

Do not set a computer name starting with RNP and rnp.

Use uppercase letters for alphabets.

Specify the SMB work group.

Enter the computer name using up to 15 characters.

"*+,/:;<>=?[\]|. and spaces cannot be entered.

Use uppercase letters for alphabet.

Set the access speed for networks.

The default setting is Auto Select.

Select a speed that matches your network environment. [Auto Select] should usually be selected.

Specify the IEEE 802.1X authentication for Ethernet.

The default setting is Inactive.

For details about IEEE 802.1X authentication, see "Configuring IEEE 802.1X Authentication for Ethernet", Security Reference.

You can return the IEEE 802.1X authentication settings to their defaults.

For details about IEEE 802.1X authentication, see "Configuring IEEE 802.1X Authentication for Ethernet", Security Reference.

Check the network connection with ping command using given IPv4 address.

If you fail to connect to the network, check the following, and then retry the ping command.

• Make sure that "IPv4" in [Effective Protocol] is set to [Active].

• Check that the printer with assigned IPv4 address is connected to the network.

• There is a possibility that the same IPv4 address is used for the specified equipment.

Set the encrypted communication of SNMPv3.

The default setting is Encryption / Cleartext.

If you select [Encryption Only], you need to set an encryption password for the printer.

Set the encrypted communication of SSL/TLS.

The default setting is Ciphertext Priority.

If you select [Ciphertext Only], you need to install the SSL certificate for the printer.

Specify the host name.

Enter the host name using up to 63 characters.

Specify the printer name.

Enter the printer name using up to 31 characters.