Top Page > Network and System Settings Guide > Connecting the Machine > Using Utilities to Make Network Settings > E-mail Settings (System)

E-mail Settings (System)

This section describes how to make E-mail Settings using utilities.

Change settings by using Web Image Monitor and telnet.

[E-mail Settings] [SMTP Server]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.

[E-mail Settings] [SMTP Authentication]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.

[E-mail Settings] [POP before SMTP]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.

[E-mail Settings] [Reception Protocol] [POP3]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.

[E-mail Settings] [Reception Protocol] [IMAP4]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.

[E-mail Settings] [Reception Protocol] [SMTP]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.

[E-mail Settings] [POP3 / IMAP4 Settings]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.

[E-mail Settings] [Administrator's E-mail Address]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.

[E-mail Settings] [E-mail Communication Port]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.

[E-mail Settings] [E-mail Reception Interval]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.

[E-mail Settings] [E-mail Storage in Server]

Web Image Monitor: Can be used for specifying the setting.
telnet: Cannot be used for specifying the setting.