Ethernet
This section lists the settings required for sending e-mail with an Ethernet connection.
Menu |
User Tool |
Setting Requirements |
|---|---|---|
Interface Settings/Network |
Machine IPv4 Address |
Necessary |
Interface Settings/Network |
IPv4 Gateway Address |
Necessary |
Interface Settings/Network |
Machine IPv6 Address |
As required |
Interface Settings/Network |
IPv6 Gateway Address |
As required |
Interface Settings/Network |
IPv6 Stateless Address Autoconfiguration |
As required |
Interface Settings/Network |
DNS Configuration |
As required |
Interface Settings/Network |
DDNS Configuration |
As required |
Interface Settings/Network |
IPsec |
As required |
Interface Settings/Network |
Domain Name |
As required |
Interface Settings/Network |
WINS Configuration |
As required |
Interface Settings/Network |
Effective Protocol |
Necessary |
Interface Settings/Network |
Ethernet Speed |
As required |
Interface Settings/Network |
IEEE 802.1X Authentication for Ethernet |
As required |
Interface Settings/Network |
Permit SNMPv3 Communication |
As required |
Interface Settings/Network |
Permit SSL / TLS Communication |
As required |
Interface Settings/Network |
Host Name |
As required |
E-mail Settings |
SMTP Server |
Necessary |
E-mail Settings |
SMTP Authentication |
As required |
E-mail Settings |
POP before SMTP |
As required |
E-mail Settings |
Reception Protocol |
As required |
E-mail Settings |
POP3 / IMAP4 Settings |
As required |
E-mail Settings |
Administrator's E-mail Address |
As required |
E-mail Settings |
E-mail Communication Port |
As required |
For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
When POP before SMTP is set to [On], also make settings for Reception Protocol and POP3 / IMAP4 Settings.
When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.
For details about how to specify the settings, see "Interface Settings" and "E-mail Settings".
