ManualsContentsPreviousNext |
This section describes how to add and store toner.
|
|
|
|
|
|
|
Always add toner when the printer instructs you.
Fault may occur if you use toner other than the recommended type.
When adding toner, do not turn off the operation switch. If you do, settings will be lost.
Do not repeatedly install and remove toner bottles. This will result in toner leakage.
Do not shake the removed toner bottle. Remaining toner might scatter.
Do not use recycled toner. This will damage the printer.
During toner adding, the toner bottle is rotating. Do not touch the toner bottle.
If toner remains in the bottle, you cannot remove the bottle. Do not remove the bottle forcibly.
Be sure to set the new toner bottle in the lower hole first.
Store toner containers in a cool, dry place free from direct sunlight.
Store toner on a flat surface.
If the message "Check toner cartridge replacement(s)." appears, the toner has almost run out. Have a replacement toner cartridge at hand.
You can check the name of the required toner and the replacement procedure using the "Add Toner" screen.
Press [System Status] to check contact number where you can order supplies. See “Checking Machine Status and Settings”, Troubleshooting.
Approximately 200 sheets can be printed after appears. However, prints may become increasingly faded, so replace the toner bottle as soon as possible.
If one of the toner bottle is empty, you can keep printing by using the other bottle.
You can change the toner bottle during printing.
When you change one toner bottle, do not touch the other one.