ManualsContentsPreviousNext |
This section describes paper unusable on this printer.
|
To prevent faults, do not use any of the following kinds of treated paper:
Paper for inkjet printers
Art paper
Aluminum foil
Carbon paper
Conductive paper
Paper with perforated lines
Hemmed-edge paper
Envelopes
Tab stock (when using the stacker tray)
Faults can occur if you print onto sides that are already printed. Take care to print onto unprinted sides only.
To prevent misfeeds, do not use the following kinds of paper:
Bent, folded, or creased paper
Perforated paper
Slippery paper
Torn paper
Rough paper
Thin paper with little stiffness
Paper with a dusty surface
Even supported types of paper may cause paper jams or malfunctions if the paper is not in good condition.
If you print onto rough grain paper, the output image might be blurred.
Do not load sheets that have already been printed onto by another machine. (Sheets can become jammed if they have been improperly stored.)