ManualsContentsPreviousNext |
This section describes the types of paper and required settings.
Plain paper
Item |
Description |
---|---|
Paper thickness |
52 105 g/m2 (14 28 lb. Bond) |
Printer setup |
The default setting of [Paper Type] is [Do not Display]. If any other [Paper Type] is selected, change the setting using the following procedure. Press the [Tray Paper Setting] key Select the tray number on the screen Set [Paper Type] to [Do not Display] Set [Paper Thickness] to [Plain Paper]. |
Printer driver setup |
Select [Plain] in [Paper Type]. |
Supported paper feeding tray |
Any input tray can be used. |
Paper capacity |
When loading paper, make sure the stack height does not exceed the limit mark of the paper tray. Paper capacity is calculated using paper that is 0.1 mm (0.01 inch) thick. |
Duplex printing |
Supported |
Thick paper
Item |
Description |
---|---|
Paper thickness |
106 300 g/m2 (28 lb. Bond 110 lb. Cover)
|
Printer setup |
Press the [Tray Paper Setting] key Select the tray number on the screen Set [Paper Type] to the type you want displayed first Set [Paper Thickness] to [Middle Thick], [Thick Paper 1], [Thick Paper 2], or [Thick Paper 3]. |
Printer driver setup |
Select the same Paper Type as you specified in [Tray Paper Settings]. |
Supported paper feeding tray |
|
Paper capacity |
|
Duplex printing |
|
Additional cautions |
For details about the recommended conditions for using thick paper, see “Thick Paper”. |
Thin paper
Item |
Description |
---|---|
Paper thickness |
40 51 g/m2 (11 14 lb. Bond) |
Printer setup |
Press the [Tray Paper Setting] key Select the tray number on the screen Set [Paper Type] to the type you want displayed first Set [Paper Thickness] to [Thin Paper]. |
Printer driver setup |
Select the same Paper Type as you specified in [Tray Paper Settings]. |
Supported paper feeding tray |
Tray 5 (wide LCT) |
Paper capacity |
|
Duplex printing |
Not supported |
Additional cautions |
Thin paper cannot be used with the punch or staple function. |
OHP transparencies
Item |
Description |
---|---|
Printer setup |
Press the [Tray Paper Setting] key Select the tray number on the screen Set [Paper Type] to [OHP (Transparency)]. |
Printer driver setup |
Select [Transparency] in [Paper Type]. |
Supported paper feeding tray |
Trays 2 6 and multi bypass tray |
Paper capacity |
|
Duplex printing |
Not supported |
Additional cautions |
|
Letterhead
Item |
Description |
---|---|
Printer setup |
Press the [Tray Paper Setting] key Select the tray number on the screen Set [Paper Type] to [Letterhead] Set [Paper Thickness] to [Thin Paper], [Plain Paper], [Middle Thick], [Thick Paper 1], [Thick Paper 2], or [Thick Paper 3]. |
Printer driver setup |
Select [Letterhead] in [Paper Type]. |
Supported paper feeding tray |
Any input tray can be used. |
Paper capacity |
|
Duplex printing |
Supported |
Additional cautions |
|
Label paper
Item |
Description |
---|---|
Printer setup |
Press the [Tray Paper Setting] key Select the tray number on the screen Set [Paper Type] to [Label Paper]. |
Printer driver setup |
Select [Label] in [Paper Type]. |
Supported paper feeding tray |
Tray 5 |
Paper capacity |
|
Duplex printing |
Not supported |
Additional cautions |
Label paper cannot be used with the punch or staple function. |
Coated paper
Item |
Description |
---|---|
Printer setup |
Press the [Tray Paper Setting] key Select the tray number on the screen Set [Paper Type] to [Coated Paper]. |
Printer driver setup |
Select [Coated] in [Paper Type]. |
Supported paper feeding tray |
Trays 4 6 (wide LCT) |
Paper capacity |
|
Duplex printing |
Supported |
Additional cautions |
|
Special paper
Item |
Description |
---|---|
Special paper standard |
When you cannot print successfully with other paper type settings, set special paper. |
Printer setup |
Press the [Tray Paper Setting] key Select the tray number on the screen Set [Paper Type] to [Special Paper]. |
Printer driver setup |
Select [Special] in [Paper Type]. |
Supported paper feeding tray |
Any input tray can be used. |
Paper capacity |
|
Duplex printing |
Supported |
Additional cautions |
|
The optional wide LCT has a fan that blows air between loaded sheets to prevent them becoming jammed. The fan has a setting that allows you to specify how long the fan continues to blow air. For details about this setting, see “Adjustment Settings for Operators”, Network and System Settings Guide.
When active, the fan inside the optional wide LCT will produce noise. This noise is normal and does not indicate a problem.
If extremely curled paper often becomes jammed, adjust the level of paper curl correction. For details about adjusting this setting, see “Adjustment Settings for Operators”, Network and System Settings Guide.