Skip headerPro 907/Pro 1107/Pro 1357
ManualsContentsPreviousNextHelp

Paper Grain

This section explains paper grains and how to load thick paper into the paper trays.

When you want to print onto translucent paper or paper lighter than 80 g/m2 (20 lb. Bond) set the paper as shown in the following illustration. Not doing so might cause a paper jam, marked edges or the paper edges to be folded.

Illustration of paper grain

  1. Direction of paper grain (top image indicates long grain, bottom image indicates short grain)

  2. How to set the paper in the paper tray (direction as seen from above the paper tray)

If you want to set 80g/m2 (20 lb. Bond) or heavier paper, set the paper as shown in the following illustration.

Illustration of paper grain

  1. Direction of paper grain (top image indicates long grain, bottom image indicates short grain)

  2. How to set the paper in the paper tray (direction as seen from above the paper tray)