ManualsContentsPreviousNext |
ENERGY STAR® Program Requirements for Imaging Equipment The ENERGY STAR® Program Requirements for Imaging Equipment encourage energy conservation by promoting energy efficient computers and other office equipment. The program backs the development and dissemination of products that feature energy saving functions. It is an open program in which manufacturers participate voluntarily. Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Energy Star standards and logos are internationally uniform. |
Low Power Mode
If this printer remains idle for a specified period, it automatically reduces its electrical consumption.
The default period the printer waits before entering Low Power Mode is 15 minutes. This default time can be changed.
Sleep Mode
If this printer is already in Low Power Mode and remains idle for a specified period, it automatically enters Sleep Mode to further reduce its electrical consumption.
The default delay time the printer waits before entering Sleep Mode is 120 minutes. This default time can be changed.
The printer can print jobs from computers while in Sleep Mode.
Specifications
Type 2 |
Type 3 |
|
---|---|---|
Reduced Electrical Consumption by Low Power Mode |
155.1 W |
146.8 W |
Time of Switch into Low Power Mode |
15 minutes |
15 minutes |
Time of Switch out from Low Power Mode |
31 seconds |
62 seconds |
Reduced Electrical Consumption by Sleep Mode |
55 W |
55 W |
Time of Switch into Sleep Mode |
120 minutes |
120 minutes |
Specifications can vary depending on which options are installed on the printer.
For details about how to change the default interval, see “Timer Settings”, Network and System Settings Guide.
“Timer Settings”, Network and System Settings Guide.