Saving Energy
This section explains the printer's energy saving functions.
This printer has the following energy saving functions.
Energy Saver
If you do not use the printer for a certain period after an operation, or when you press the [Energy Saver] key, the display disappears and the printer goes into Energy Saver mode. When you press the [Energy Saver] key again, the printer returns to the ready condition. The printer uses less electricity in Energy Saver mode.
You can change the amount of time the printer waits before switching to Energy Saver mode after printing has finished or the last operation is performed under Energy Saver Timer.
Auto Off
The printer automatically turns itself off when the job is finished, after a certain period of time has elapsed. This function is called “Auto Off”.
You can change the Auto Off time under Auto Off Timer.
See “System Settings”, Network and System Settings Guide
.The Energy Saver and Auto Off functions will not operate in the following cases:
When a warning message appears
When the service call message appears
When paper is jammed
When the cover is open
When the “Add Toner” message appears
When toner is being replenished
When the User Tools / Inquiry screen is displayed
When the Counter screen is displayed
When fixed warm-up is in progress
When data is being processed
When operations are suspended during printing
When the Data In indicator is on or blinking
