If You Cannot Exit from Connect Copy

There is no response when you press [Connect Copy].

Scanning is in progress.

Press the [Stop] key on the main machine, and then press [Stop].

There is no response when you press [Connect Copy].

Copying is in progress.

Press the [Stop] key on the main machine, and then press [Stop].

There is no response when you press [Connect Copy].

A paper misfeed has occurred on either the main or sub-machine.

• Follow the instructions displayed.

  For details, see Removing Jammed Paper and Removing Jammed Staples.

  If the sub-machine's display indicates that a cover is open, follow the instructions displayed.

• To cancel Connect Copy, Press the [Stop] key on the main machine, and then press [Stop].

There is no response when you press [Connect Copy].

A paper misfeed has occurred on one of the machine, or toner or other supplies need to be replaced.

• Follow the instructions displayed.

  See Removing Jammed Paper.

  See "Loading Paper" and "Adding Toner", About This Machine.

• To cancel Connect Copy, Press the [Stop] key on the main machine, and then press [Stop].

There is no response when you press [Connect Copy].

A paper misfeed has occurred during stapling.

Removed the jammed paper.

For details, see Removing Jammed Staples.

To cancel Connect Copy, press the [Stop] key on the main machine, and then press [Stop].