Skip header
 

Top Page > Network and System Settings Guide > Registering Addresses and Users for Scanner Functions > Registering SMTP and LDAP Authentication > LDAP Authentication

LDAP Authentication

This section describes how to register LDAP Authentication.

For each user registered in the Address Book, you can register a login user name and login password to be used when accessing a LDAP server.

To use a LDAP server, you need to program it beforehand. For details, see "Programming the LDAP server".

Important

  • When [Do not Specify] is selected for LDAP Authentication, the User Name and Password that you have specified in Program / Change LDAP Server of Administrator Tools settings applies. For details, see "Programming the LDAP server".

1Press the [User Tools] key.

2Press [System Settings].

Operation panel screen illustration

3Press [Administrator Tools].

4Press [Address Book Management].

5Check that [Program / Change] is selected.

6Press the name you want to register or enter the registered number using the number keys.

You can search by the registered name, folder name, and e-mail address.

7Press [Auth. Info], and then press [Down arrow keyNext].

8Press [Specify Other Auth. Info] right "LDAP Authentication".

9Press [Change] right "Login User Name".

Operation panel screen illustration

10Enter the login user name, and then press [OK].

11Press [Change] right "Login Password".

12Enter the password, and then press [OK].

13Enter the password again to confirm, and then press [OK].

14Press [OK].

15Press [Exit].

16Press the [User Tools] key.

Note

  • To register the name, see "Registering Names".

  • You can enter up to 128 characters for the user name.

  • You can enter up to 128 characters for the password.

  • To change the LDAP Authentication settings, repeat step 3 to 14.

Reference