Skip header
 

Top Page > Network and System Settings Guide > Tray Paper Settings > Items of Tray Paper Settings > Interposer Upper and Lower Tray (with the Optional Cover Interposer Tray CI5010)

Interposer Upper and Lower Tray (with the Optional Cover Interposer Tray CI5010)

Paper Size

You can select the size of the paper loaded in the Interposer Upper and Lower Tray.

This menu appears only when the optional Cover Interposer Tray is installed.

The paper sizes you can set for Interposer Upper and Lower Tray are as follows:

  • [Auto Detect]

  • 13×191/5Landscape, 13×19Landscape, 13×18Landscape, 123/5×191/5Landscape, 123/5×181/2Landscape, 12×18Landscape,

    11×17Landscape, 11×15Landscape, 11×14Landscape, 10×15Landscape, 10×14Landscape, 81/2×14Landscape, 81/2×13Landscape,

    81/2×11Landscape, 81/4×14Landscape, 81/4×13Landscape, 8×13Landscape, 8×10Landscape, 71/4×101/2Landscape, 51/2×81/2Landscape,

    A3Landscape, A4Landscape, A5Landscape, B4 JISLandscape, B5 JISLandscape, SRA3Landscape, SRA4Landscape, 310×432 mmLandscape,

    226×310 mmLandscape, 210×340 mmLandscape, 8KLandscape, 16KLandscape

  • 81/2×11Portrait, 71/4×101/2Portrait, 51/2×81/2Portrait, A4Portrait, A5Portrait, B5 JISPortrait, SRA4Portrait,

    226×310 mmPortrait, 182×210 mmPortrait, 170×210 mmPortrait, 16KPortrait

  • [Custom Size]

You can specify a custom size of between 5.5 - 13.0 inches (139.7 - 330.2 mm) vertically, and between 5.5 - 19.2 inches (139.7 - 487.7 mm) horizontally.

The default setting is Auto Detect.

Note

  • For details about paper sizes that can be automatically detected, see "Recommended Paper Sizes and Types", About This Machine.

Designation Sheet 1 - 9

The destination sheet 1 - 9 can be specified.

Cover Sheet Tray

You can select [On] or [Off].

The default setting is [Off].

Back Cover Sheet Tray

You can select [On] or [Off].

The default setting is [Off].