Tray 6 (with the optional Wide Large Capacity Tray)

The paper sizes you can set for Tray 6 (with the optional Wide LCT) are as follows:

• [Auto Detect]

• 13×19¹/₅, 13×19, 13×18, 12³/₅×19¹/₅, 12³/₅×18¹/₂, 12×18,

  11×17, 11×15, 11×14, 10×15, 10×14, 8¹/₂×14, 8¹/₂×13,

  8¹/₂×11, 8¹/₄×14, 8¹/₄×13, 8×13, 8×10, 7¹/₄×10¹/₂, ¹/₂×8¹/₂,

  A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS, SRA3, SRA4,

  310×432 mm, 226×310 mm, 210×340 mm, 8K, 16K

• 8¹/₂×11, 7¹/₄×10¹/₂, 5¹/₂×8¹/₂, A4, A5, B5 JIS, SRA4,

  226×310 mm, 182×210 mm, 170×210 mm, 16K

• [Custom Size]

You can specify a custom size of between 5.5 - 13.0 inches (139.7 - 330.2 mm) vertically, and between 5.5 - 19.2 inches (139.7 - 487.7 mm) horizontally.

You can specify a custom size between 3.94 - 5.5 inches (100.0 - 139.7 mm) horizontally. To use the custom size paper, additional setup is required. For details, contact your service representative.

The default setting is Auto Detect.

You can set the display so you can see what type of paper is loaded in each paper tray.

The print function uses this information to automatically select the paper tray.

The paper types you can set for Tray 6 (with the optional Wide LCT) are as follows:

[Do not Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Yellow], [Green], [Blue], [Purple], [Ivory], [Orange], [Pink], [Red], [Gray], [Letterhead], [Translucent Paper], [Preprinted Paper], [Bond Paper], [Cardstock], [OHP (Transparency)], [Prepunched Paper], [Coated Paper], [Tab Stock]

The paper thicknesses you can set for Tray 6 (with the optional Wide LCT) are as follows:

• Plain Paper

  52 - 105 g/m² (14 - 28 lb BOND)

• Middle Thick

  106 - 163 g/m² (28 lb BOND - 90 lb INDEX)

• Thick Paper 1

  164 - 216 g/m² (90 lb INDEX - 80 lb COVER)

• Thick Paper 2

  217 - 256 g/m² (80 lb COVER - 140 lb INDEX)

The default setting for "Paper Type" is Do not Display.

The default setting for "Paper Thickness" is Plain Paper.

The default setting for "Apply Duplex" is Yes.

The default setting for "Apply Auto Paper Select" is Yes.

The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".

For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", About This Machine.

For details about the recommended conditions for using thick paper, see "Thick Paper", About This Machine.

The optional tab sheet holder is required when using tab stock in Tray 6.

The Tab Position Shift can be set in millimeters, when Tab Stock has been selected.

The Tab Position Shift can be set in 1 inch (1 millimeter) units, within a range of 0 to 0.6 inches (0 to 15 mm). The default is "0.5" inches (13 mm).

You can specify and display the paper tray to set designation sheets. You can also specify the display time and copying method for two sided copying.

• Select Designation Sheet from 1-9

  You can specify paper tray 1-9 as the source trays for designation sheets.

• Display Time

  You can select [At Mode Selected] or [Full Time].

• Apply Duplex

  You can select [Yes] or [No].

You can specify and display the paper tray to set front cover sheets. You can also specify the display time and copying method for two sided copying.

• Display Time

  You can select [At Mode Selected] or [Full Time].

• Apply Duplex

  You can select [Yes] or [No].

You can specify and display the paper tray to set back cover sheets. You can also specify the display time and copying method for two sided copying.

• Display Time

  You can select [At Mode Selected] or [Full Time].

• Apply Duplex

  You can select [Yes] or [No].

You can specify and display the paper tray in which to set slip sheets. You can also specify the display time.

• Display Time

  You can select [At Mode Selected] or [Full Time].

You can specify and display the paper tray in which to set slip sheets. You can also specify the display time.

• Display Time

  You can select [At Mode Selected] or [Full Time].