Skip headerimage
ManualsContentsPreviousNextHelp

User Stamp

This section describes the user tools in the User Stamp menu under Stamp.

Program/Delete Stamp

You can register, change, or delete user stamps.

You can register up to five custom stamps with your favorite designs.

For details about how to program the user stamp, see "User Stamp".

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

Stamp Format:1hyphen5

Specify how each of registered user stamps 1 to 5 is printed.

  • Stamp Position

    Specify where to print the user stamp.

    The default setting is Top Right.

  • Adjust Stamp Position

    You can adjust the position of the user stamp within the available ranges shown below.

    • Metric version:

      "Top Left"-T/B: 4hyphen144mm, L/R: 4hyphen144mm

      "Top Center"-T/B: 4hyphen144mm, L/R: 72hyphen72mm

      "Top Right"-T/B: 4hyphen144mm, L/R: 4hyphen144mm

      "Center Left"-T/B: 72hyphen72mm, L/R: 4hyphen144mm

      "Center"-T/B: 72hyphen72mm, L/R: 72hyphen72mm

      "Center Right"-T/B: 72hyphen72mm, L/R: 4hyphen144mm

      "Bottom Left"-T/B: 4hyphen144mm, L/R: 4hyphen144mm

      "Bottom Center"-T/B: 4hyphen144mm, L/R: 72hyphen72mm

      "Bottom Right"-T/B: 4hyphen144mm, L/R: 4hyphen144mm

    • Inch version:

      "Top Left"-T/B: 0.1hyphen5.7 inches, L/R: 0.1hyphen5.7 inches

      "Top Center"-T/B: 0.1hyphen5.7 inches, L/R: 2.8hyphen2.8 inches

      "Top Right"-T/B: 0.1hyphen5.7 inches, L/R: 0.1hyphen5.7 inches

      "Center Left"-T/B: 2.8hyphen2.8 inches, L/R: 0.1hyphen5.7 inches

      "Center"-T/B: 2.8hyphen2.8 inches, L/R: 2.8hyphen2.8 inches

      "Center Right"-T/B: 2.8hyphen2.8 inches, L/R: 0.1hyphen5.7 inches

      "Bottom Left"-T/B: 0.1hyphen5.7 inches, L/R: 0.1hyphen5.7 inches

      "Bottom Center"-T/B: 0.1hyphen5.7 inches, L/R: 2.8hyphen2.8 inches

      "Bottom Right"-T/B: 0.1hyphen5.7 inches, L/R: 0.1hyphen5.7 inches

  • Page to Stamp

    Sets whether to print the stamp on all pages or only the first page.

    The default setting is All Pages.

  • Adj. Back Side Stamp Position

    You can adjust the stamp position for back side in duplex mode, within the available range as shown below.

    • Metric version:

      Left-Right: Left 432 mmhyphenRight 432 mm

      Top-Bottom: Top 432 mmhyphenBottom 432 mm

    • Inch version:

      Left-Right: Left 17.0 incheshyphenRight 17.0 inches

      Top-Bottom: Top 17.0 incheshyphenBottom 17.0 inches

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

Reference