ManualsContentsPreviousNext |
You can insert a blank designation sheet before or after a specified page.
Before using this function, you must specify the tray for Designation Sheet 19 in Tray Paper Settings. For details, see "Tray Paper Settings", Network and System Settings Guide.
Press [Cover/Slip Sheet].
Press [Designate / Chapter].
Press [Insert Sheet].
Press the key to select the chapter number.
Select the designation sheet tray that contains the paper for the designation sheets.
Select [Before] to insert slip sheets before the desired page. Select [After] to insert slip sheets after the desired page. Enter the page number with the number keys.
Press [Number of Sheets], and enter the number of sheets you want to insert with the number keys, and the press the [] key.
To specify another location where to insert sheets, repeat steps 4 to 7.
Select the main sheet tray that contains the paper to copy the originals.
After making all settings, press [OK] twice.
The designation sheets should be the same size and orientation as the main sheets.
To change the value you entered, press the key you want to change, and then enter a new value.
For details about the interposer, see "Loading Paper", About This Machine.