Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
Specify the size of the finished bound booklets and cut three edges to a regular size.
Book block paper and cover sheet compatibility
If you specify finishing to a regular size, you can select one of the following sizes: A4
, B5 JIS, A5, 81/2 × 11, 51/2 × 81/2.
We recommend that you use the cover sheet size with the book block paper sizes as shown in the following table.
Required finished size |
Book block |
Cover |
|---|---|---|
A4 |
225 × 320 mm *1 226 × 310 mm *1 |
13 × 19.2 *1 13 × 19 *1 13 × 18 320 × 450 mm *1 |
B5 JIS |
A4 |
A3 |
A5 |
B5 JIS |
B4 JIS |
81/2 × 11 |
9 × 12 *1 |
13 × 19.2 *1 13 × 19 *1 |
51/2 × 81/2 |
71/4 × 101/2 |
11 × 14.9 *1 |
*1 Specify the paper size using [Custom Size] in Tray Paper Settings.
Press [Cut 3 Edges].
Press [Specify Finishing Size].
Select the finished size under [Regular Size].
To adjust the cut position, press [Cut Position Fine Adj.].
Press [
] and [
] to set the top or bottom cut position, and then press [OK].
To change the value you entered, press [] or [], or press [Clear], and then specify a new value.
Press [OK] twice.
You can shift the cut position from -22.0 to 22.0 mm (-0.86 to 0.86 inch) in 0.1 mm (0.01 inch) increments.
 |
 | Copyright (C) 2008 |
