Punching copies for ring binding

Use this function to punch holes into copies so that those copies can be inserted into a ring bound booklet.

Illustration of punching copies by ring binding

Original orientation and binding position

Place all the originals in the ADF in the orientation in which they can be read normally. When placing the original on the exposure glass, keep the same orientation, but set the original facing downwards.

The relationship between the orientation in which you place the original and the punch hole positions is as follows:

Illustration of original orientation and binding position

*1 The above table shows punching positioning. The orientation of the paper does not indicate direction of delivery.

Place the originals.
Press [Output/Customize Function/Finisher].
Press [Finisher].
Select one of the punch hole positions.
Press [OK].
Enter the number of copy sets using the number keys.
Specify other copier functions, if necessary.
Press the [Start] key.

When placing an original on the exposure glass, start with the first page to be copied. When placing originals in the ADF, set so that the first page is on the top.
When placing originals on the exposure glass, press the [] key after all the originals have been scanned.