Skip headerimage
ManualsContentsPreviousNextHelp

Copying onto OHP Transparencies or Translucent Paper

When copying onto OHP transparencies or translucent paper, select the type and size of paper.

Important

  1. Set the side fences to the paper size.

  2. Place paper in the multi bypass tray (Tray 7), and then set the side fences to the paper size.

  3. Set the end fence, and then press the elevator switch on the multi bypass tray (Tray 7).

  4. Select the multi bypass tray (Tray 7) on the control panel.

  5. Press the [Sharp] key.

  6. Select the paper type ([OHP (Transparency)] or [Translucent Paper]) in Special Paper.

    Operation panel screen illustration

  7. Specify the paper size, and then press [OK].

  8. Place the originals, and then press the [Start] key.

Note