Skip headerimage
ManualsContentsPreviousNextHelp

Copying onto Regular Size Paper

Makes copies onto regular size paper from the multi bypass tray.

  1. Set the side fences to the paper size.

  2. Place paper in the multi bypass tray (Tray 7), and then set the side fences to the paper size.

  3. Set the end fence, and then press the elevator switch on the multi bypass tray (Tray 7).

  4. Select the multi bypass tray (Tray 7) on the control panel.

  5. Press the [Sharp] key.

  6. Press [Select Regular Size].

    Operation panel screen illustration

  7. Select the paper size.

    Operation panel screen illustration

  8. Press [OK] twice.

  9. Place the originals, and then press the [Start] key.