This section describes the user tools in the Date Stamp menu under Stamp.
Format
You can select the date format for Date Stamp mode.
The default setting is DD / MM / YYYY (Metric version) / MM / DD / YYYY (Inch version).
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Font
You can select the date stamp font.
The default setting is Font 1.
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Size
You can set the date stamp size.
The default setting is Auto.
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Superimpose
You can have the date stamp printed in white when it overlaps black parts of the image.
The default setting is Off.
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Stamp Setting
Specify how date stamp is printed.
Stamp Position
Specify where to print the Date Stamp.
The default setting is Top Left.
Adjust Stamp Position
You can adjust the position of the date stamp within the available ranges shown below.
Metric version:
“Top Left”-T/B: 4144mm, L/R: 4144mm
“Top CenterT/B: 4144mm, L/R: 7272mm
“Top Right”-T/B: 4144mm, L/R: 4144mm
“Bottom Left”-T/B: 4144mm, L/R: 4144mm
“Bottom Center”-T/B: 4144mm, L/R: 7272mm
“Bottom Right”-T/B: 4144mm, L/R: 4144mm
Inch version:
“Top Left”-T/B: 0.15.7 inches, L/R: 0.15.7 inches
“Top Center”-T/B: 0.15.7 inches, L/R: 2.82.8 inches
“Top Right”-T/B: 0.15.7 inches, L/R: 0.15.7 inches
“Bottom Left”-T/B: 0.15.7 inches, L/R: 0.15.7 inches
“Bottom Center”-T/B: 0.15.7 inches, L/R: 2.82.8 inches
“Bottom Right”-T/B: 0.15.7 inches, L/R: 0.15.7 inches
Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
The default setting is All Pages.
Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as shown below.
Metric version:
Left-Right: Left 432 mmRight 432 mm
Top-Bottom: Top 432 mmBottom 432 mm
Inch version:
Left-Right: Left 17.0 inchesRight 17.0 inches
Top-Bottom: Top 17.0 inchesBottom 17.0 inches
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.