Preset Stamp

You can select the language of the message printed in Stamp mode.

• English, German, French, Italian, Spanish, Dutch, Portuguese, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian, Danish, Russian, Japanese, Simplified Chinese, Traditional Chinese, Hangul, Catalan, Turkish

The default setting is English.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

You can select the stamp type given priority when [Preset Stamp] is pressed.

The default setting is COPY.

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.

Specify how each of stamp is printed.

• Stamp Position

  Specify where to print the stamp.

  The default setting is Top Right.

• Adjust Stamp Position

  You can adjust the print position of the stamp within the available ranges shown below.

  • Metric version:

    “Top Left”-T/B: 4144mm, L/R: 4144mm

    “Top Center”-T/B: 4144mm, L/R: 7272mm

    “Top Right”-T/B: 4144mm, L/R: 4144mm

    “Center Left”-T/B: 7272mm, L/R: 4144mm

    “Center”-T/B: 7272mm, L/R: 7272mm

    “Center Right”-T/B: 7272mm, L/R: 4144mm

    “Bottom Left”-T/B: 4144mm, L/R: 4144mm

    “Bottom Center”-T/B: 4144mm, L/R: 7272mm

    “Bottom Right”-T/B: 4144mm, L/R: 4144mm

  • Inch version:

    “Top Left”-T/B: 0.15.7 inches, L/R: 0.15.7 inches

    “Top Center”-T/B: 0.15.7 inches, L/R: 2.82.8 inches

    “Top Right”-T/B: 0.15.7 inches, L/R: 0.15.7 inches

    “Center Left”-T/B: 2.82.8 inches, L/R: 0.15.7 inches

    “Center”-T/B: 2.82.8 inches, L/R: 2.82.8 inches

    “Center Right”-T/B: 2.82.8 inches, L/R: 0.15.7 inches

    “Bottom Left”-T/B: 0.15.7 inches, L/R: 0.15.7 inches

    “Bottom Center”-T/B: 0.15.7 inches, L/R: 2.82.8 inches

    “Bottom Right”-T/B: 0.15.7 inches, L/R: 0.15.7 inches

• Size

  You can set the size of the stamp.

  The default setting is 1X.

• Density

  You can set the pattern used to print the stamp.

  • Normal

    The stamp is printed on the image. You cannot check which parts will overlap.

  • Lighter

    The image can be seen through the stamp.

  • Lightest

    The image appears even clearer than in the Lighter setting.

  The default setting is Normal.

• Page to Stamp

  You can have the stamp printed on the first page or all pages.

  The default setting is All Pages.

• Adj. Back Side Stamp Position

  You can adjust the stamp position for back side in duplex mode, within the available range as shown below.

  • Metric version:

    Left-Right: Left 432 mmRight 432 mm

    Top-Bottom: Top 432 mmBottom 432 mm

  • Inch version:

    Left-Right: Left 17.0 inchesRight 17.0 inches

    Top-Bottom: Top 17.0 inchesBottom 17.0 inches

The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.