![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
If the indicator to the left of a function key is lit red, press the corresponding function key. Then, follow the instructions displayed on the control panel.
If a function error occurs, check the message that appears on the control panel, and then refer to "Messages Displayed" for the relevant function.
To resolve problems, refer to the following:
Problem |
Cause |
Solution |
---|---|---|
Documents and reports do not print out. |
The paper output tray is full. |
Remove prints from the tray. |
Documents and reports do not print out. |
There is no paper left. |
Load paper. See "Loading Paper", About This Machine. |
An error has occurred. |
The function is not working properly. |
Record the code number shown on the display and contact your service representative. See "Messages Displayed" of each chapter. You can use the other functions as normal. |
The machine is unable to connect to the network. |
A network error has occurred. |
|