Chaptering

The specified page is printed on the same side as the first page, like a book. Also, you can insert chapter slip sheets before specified pages, and select whether or not to print on the slip sheets.

No Slip Sheets

The specified page is always printed on the same side as the first page.

Illustration of no slip sheets

This function is only valid with duplex printing.
You can designate up to 100 locations using the printer driver.
This function can be used together with combine (layout) printing.
For details about printing methods, see the printer driver Help.

Inserting Chapter Slip Sheets

Insert chapter slip sheets before the specified page.

Chapter slip sheets cannot be printed on if they are fed from the optional interposer.

Print
Prints on the chapter slip sheets. When duplex printing is selected, both sides of the slip sheets are printed on.
Blank

You can designate up to 100 locations using the printer driver.
The slip sheet should be the same size and orientation as the body paper.
If "Auto Tray Select" has been set as the paper feed tray for the body paper, the paper will be delivered from a tray containing paper in the orientation. Therefore, when the slip sheet has been set to the orientation, the orientation of the output slip sheet and body will be different.
The same paper feed tray cannot be set for the body of the document and the slip sheet.
For details about printing methods, see the printer driver Help.

Designated Sheet Print

You can print a designated area of a page onto another sheet.

You cannot specify [Chaptering] or [Designate] inside the [Designated Sheet Print] area.

When printing one side
When printing both sides

If front cover printing is set and the first page of the document is specified as the start page for the designated sheet print, the designated sheet print area setting is ignored.
If back cover printing is set, the last page of the document is included in the designated sheet print pages, and the last page is printed on paper fed from the back cover tray.
If back cover printing is not set and the last page of the document is included in the designated sheet print pages, all pages are printed on paper fed from the chaptering tray, and a blank back cover is added.
Paper trays such as the interposer tray that are unavailable for normal printing cannot be specified for chaptering.
You can designate up to 100 locations using the printer driver.
For the slip sheets, specify the same size and orientation as is specified for the main paper.
For details about printing methods, see the printer driver Help.