![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
Follow the procedure below to check machine status.
Start SmartDeviceMonitor for Admin.
On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using TCP/IP SNMPv3, enter the user authentication.
Click the [View] menu, and then click [Select Device List Columns].
From [Device] in the [Select Device List Columns] dialog box, select the items you want to display, and then click [Add].
Selected items will move to [Show].
Move all the items you want to display, and then click [OK].
An icon in the list indicates the machine's status.
For information about a machine's status, select the machine you want to know about, and then click [Open] in the [Device Settings] menu.
The dialog box of the selected machine appears.
Click the application whose status you want to view.
The machine's status is displayed.
Quit SmartDeviceMonitor for Admin.
For details about items in the dialog box, see SmartDeviceMonitor for Admin Help.