Specifications for the Main Unit

This section describes specifications for the main unit.

Configuration:

Console

Photosensitivity type:

OPC drum

Original scanning:

One-dimensional solid scanning system through CCD

Copy process:

Dry electrostatic transfer system

Development:

Dry two-component magnetic brush development system

Fusing:

Heating roll pressure system

Scan resolution:

600 dpi × 600 dpi

Copy/Print resolution:

1200 dpi × 1200 dpi

Exposure glass:

Stationary original exposure type

Original reference position:

Rear left corner

Warm-up time (23°C, rated voltage):

360 seconds or less

Originals:

Sheet/book/objects

Maximum original size:

A3, 11 × 17

Paper size:

Tray 1: A4, 8¹/₂ × 11
Tray 2, 3:
A3, B4 JIS, A4, A5, B5 JIS,
12 × 18, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₂ × 5¹/₂, 8¹/₄ × 13, 8 × 13, 7¹/₄ × 10¹/₂, 8K, 16K,
8¹/₄ × 14, 8 × 10, 11 × 15, 11 × 14, 10 × 15, 11 × 15, 10 × 14, 13 × 18,
SRA3, SRA4, 226 × 310 mm, 310 × 432 mm, custom size
Duplex:
A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS,
11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 8¹/₂ × 5¹/₂, 210 × 182 mm, 210 × 170 mm, 210 × 340 mm, 8K, 16K,
12 × 18, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 13 × 19¹/₅, 13 × 19, 12³/₅ × 19¹/₅, 12³/₅ × 18¹/₂, 13 × 18,
SRA3, SRA4, 226 × 310 mm, 310 × 432 mm, custom size

Paper weight:

Tray 1 Tray 3: 52.0 216.0 g/m² (14 lb. Bond 80 lb. Cover)
Duplex: 52.0 216.0 g/m² (14 lb. Bond 80 lb. Cover)

For details about and recommendations concerning thick paper, see "Thick Paper".

Non-reproduction area (Copier):

Leading edge: 4 ± 2 mm
Trailing edge: 0.3 4 mm
Left and Right: 2 ± 1.5 mm

First copy/print time:

Type 1: 3.5 seconds or less
Type 2: 3.2 seconds or less
Type 3: 3.0 seconds or less

(A4, 8¹/₂ × 11, 100% reproduction, feeding from Tray 1, on the exposure glass)

Copying speed:

Type 1:
90 copies/minute (A4, 8¹/₂×11)
Type 2:
110 copies/minute (A4, 8¹/₂×11)
Type 3:
135 copies/minute (A4, 8¹/₂×11)

Reproduction ratio:

Preset reproduction ratios:

Enlargement

Metric version

Inch version

400%

400%

200%

200%

141%

155%

122%

129%

115%

121%
Full size

Metric version

Inch version

100%

100%
Reduction

Metric version

Inch version

93%

93%

82%

85%

75%

78%

71%

73%

65%

65%

50%

50%

25%

25%

Zoom: From 25 to 400% in increments of 1%

Metric version	Inch version
400%	400%
200%	200%
141%	155%
122%	129%
115%	121%

Metric version	Inch version
100%	100%

Metric version	Inch version
93%	93%
82%	85%
75%	78%
71%	73%
65%	65%
50%	50%
25%	25%

Maximum continuous copy run:

9999 sheets

Paper capacity (80 g/m² (20 lb. Bond)):

Tray 1 (Tandem tray): 2,200 sheets (1,100 sheets × 2)
Tray 2 (550-sheet tray): 550 sheets
Tray 3 (550-sheet tray): 550 sheets

Power Source:

220240 V, 50/60 Hz, 16 A or more

Please be sure to connect the power cord to a power source as above. For details about power source, see "Power Connection".

Power consumption:

Main unit only

	Type 1	Type 2	Type 3
Warm-up	About 1.71 kW	About 1.71 kW	About 1.77 kW
Stand-by	About 320 W	About 349 W	About 340 W
During printing	About 1.75 kW	About 2.03 kW	About 2.30 kW
Maximum	About 2.62 kW	About 2.65 kW	About 3.31 kW

Complete system

	Type 1	Type 2	Type 3
Warm-up	About 1.74 kW	About 1.75 kW	About 1.81 kW
Stand-by	About 368 W	About 393 W	About 385 W
During printing	About 1.84 kW	About 2.13 kW	About 2.41 kW
Maximum	About 2.69 kW	About 2.72 kW	About 3.38 kW

The complete system consists of the main unit, Decurler, Finisher SR5000 interposer, Wide LCT and multi bypass tray.

Dimensions (W × D × H up to ADF):

870 × 860 × 1,476 mm, 34.3 × 33.9 × 58.2 inches

Space for main unit (W × D):

1,202 × 860 mm, 47.4 × 33.9 inches (optional output tray is not installed.)
5,024 × 860 mm, 197.8 × 33.9 inches (including the Decurler, Booklet Finisher SR5020, Trimmer, Multi-Folding Unit, interposer, ADF, Wide LCT, and multi bypass tray.)

Noise emission:

Sound power level:
- Main unit only
  
  Type 1
  
  Type 2
  
  Type 3
  
  Stand-by
  
  Less than 59.4 dB (A)
  
  Less than 60.2 dB (A)
  
  Less than 60.1 db (A)
  
  Copying
  
  Less than 72.6 dB (A)
  
  Less than 74.3 dB (A)
  
  Less than 76.2 db (A)
- Complete System
  
  Type 1
  
  Type 2
  
  Type 3
  
  Stand-by
  
  Less than 58.7 dB (A)
  
  Less than 59.2 dB (A)
  
  Less than 59.3 dB (A)
  
  Copying
  
  Less than 75.0 dB (A)
  
  Less than 75.8 dB (A)
  
  Less than 77.2 dB (A)
Sound pressure level:
- Main unit only
  
  Type 1
  
  Type 2
  
  Type 3
  
  Stand-by
  
  Less than 45.4 dB (A)
  
  Less than 46.5 dB (A)
  
  Less than 46.4 dB (A)
  
  Copying
  
  Less than 57.8 dB (A)
  
  Less than 60.2 dB (A)
  
  Less than 61.8 dB (A)
- Complete system
  
  Type 1
  
  Type 2
  
  Type 3
  
  Stand-by
  
  Less than 44.9 dB (A)
  
  Less than 45.2 dB (A)
  
  Less than 45.1 dB (A)
  
  Copying
  
  Less than 60.3 dB (A)
  
  Less than 61.0 dB (A)
  
  Less than 62.6 dB (A)
  - Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
  - Sound power level and sound pressure level are measured from the position of the bystander/operator.
  - The complete system consists of the main unit, Decurler, Booklet Finisher SR5020 and Wide LCT.

	Type 1	Type 2	Type 3
Stand-by	Less than 59.4 dB (A)	Less than 60.2 dB (A)	Less than 60.1 db (A)
Copying	Less than 72.6 dB (A)	Less than 74.3 dB (A)	Less than 76.2 db (A)

	Type 1	Type 2	Type 3
Stand-by	Less than 58.7 dB (A)	Less than 59.2 dB (A)	Less than 59.3 dB (A)
Copying	Less than 75.0 dB (A)	Less than 75.8 dB (A)	Less than 77.2 dB (A)

	Type 1	Type 2	Type 3
Stand-by	Less than 45.4 dB (A)	Less than 46.5 dB (A)	Less than 46.4 dB (A)
Copying	Less than 57.8 dB (A)	Less than 60.2 dB (A)	Less than 61.8 dB (A)

	Type 1	Type 2	Type 3
Stand-by	Less than 44.9 dB (A)	Less than 45.2 dB (A)	Less than 45.1 dB (A)
Copying	Less than 60.3 dB (A)	Less than 61.0 dB (A)	Less than 62.6 dB (A)

Weight:

Approx. 315 kg, 694.5 lb.