ManualsContentsPreviousNext |
This section provides explanations about external options.
Trimmer Unit TR5020
Cuts the fore edge of the book block after the book block is saddle stitched.
Booklet Finisher SR5020
Sorts, stacks, staples and punches multiple sheets of paper. The saddle stitch function can staple the copies in the centre and fold them into booklets.
*1 Finisher upper tray
*2 Finisher shift tray
*3 Finisher booklet tray
Finisher SR5000
Sorts, stacks, staples and punches multiple sheets of paper.
*4 Finisher upper tray
*5 Finisher shift tray
High Capacity Stacker SK5010
Stacks 5,250 sheets of paper.
You can install two stackers.
Ring Binder RB5000
Binds sheets with a ring comb.
Perfect Binder GB5000
Perfect binds a booklet.
Multi-Folding Unit FD5000
The Multi-Folding Unit can apply the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-fold.
To use the Multi-Folding Unit, the Finisher SR5000 or the Booklet Finisher SR5020 is required.
Interposer
Inserts cover or slip sheets into the copied or printed paper.
Decurl Unit DU5000
Flattens curls from sheets to prevent paper jams.
Large Capacity Tray (LCT)
Holds 4,550 sheets of paper.
Wide Large Capacity Tray (Wide LCT)
Holds 4,000 sheets of A3/11 × 17 or larger paper.
Multi bypass tray (Tray 7)
Use when copying or printing onto a thick paper, OHP transparency, and custom size paper.
A3/11 × 17 tray unit
You can load A3 or 11 × 17 paper in Tray 1 using this unit. If you install the A3/11 × 17 tray unit on your machine, you cannot use it as a tandem tray.
The punch function is not available on Type 3 model that is equipped with the Finisher SR5000.
Only one of the following options can be installed on the machine at any one time:
With Finisher SR5000
Stacker, Ring Binder, or Perfect Binder
With Booklet Finisher SR5020
Ring Binder or Perfect Binder
The machine cannot support two stackers if any of the following options is installed:
Ring Binder
Multi-Folding Unit
Perfect Binder
Finisher SR5000