![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes the user tools in the User Stamp menu under Stamp.
Program/Delete Stamp
You can register, change, or delete user stamps.
You can register up to five custom stamps with your favorite designs.
For details about how to program the user stamp, see "User Stamp".
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Stamp Format:15
Specify how each of registered user stamps 1 to 5 is printed.
Stamp Position
Specify where to print the user stamp.
The default setting is Top Right.
Adjust Stamp Position
You can adjust the position of the user stamp within the available ranges shown below.
Metric version:
"Top Left"-T/B: 4144mm, L/R: 4
144mm
"Top Centre"-T/B: 4144mm, L/R: 72
72mm
"Top Right"-T/B: 4144mm, L/R: 4
144mm
"Centre Left"-T/B: 7272mm, L/R: 4
144mm
"Centre"-T/B: 7272mm, L/R: 72
72mm
"Centre Right"-T/B: 7272mm, L/R: 4
144mm
"Bottom Left"-T/B: 4144mm, L/R: 4
144mm
"Bottom Centre"-T/B: 4144mm, L/R: 72
72mm
"Bottom Right"-T/B: 4144mm, L/R: 4
144mm
Inch version:
"Top Left"-T/B: 0.15.7 inches, L/R: 0.1
5.7 inches
"Top Centre"-T/B: 0.15.7 inches, L/R: 2.8
2.8 inches
"Top Right"-T/B: 0.15.7 inches, L/R: 0.1
5.7 inches
"Centre Left"-T/B: 2.82.8 inches, L/R: 0.1
5.7 inches
"Centre"-T/B: 2.82.8 inches, L/R: 2.8
2.8 inches
"Centre Right"-T/B: 2.82.8 inches, L/R: 0.1
5.7 inches
"Bottom Left"-T/B: 0.15.7 inches, L/R: 0.1
5.7 inches
"Bottom Centre"-T/B: 0.15.7 inches, L/R: 2.8
2.8 inches
"Bottom Right"-T/B: 0.15.7 inches, L/R: 0.1
5.7 inches
Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
The default setting is All Pages.
Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as shown below.
Metric version:
Left-Right: Left 432 mmRight 432 mm
Top-Bottom: Top 432 mmBottom 432 mm
Inch version:
Left-Right: Left 17.0 inchesRight 17.0 inches
Top-Bottom: Top 17.0 inchesBottom 17.0 inches
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.