Skip headerimage
ManualsContentsPreviousNextHelp

Scan Position

You can move the scanning position of originals.

Illustration of Scan Position

  1. Point from which the machine begins scanning

You can move the scanning position up to 30 mm (1.2 inches) in 1 mm (0.1 inch) increments upward, downward, to left and to right.

Illustration of Scan Position

  1. Top: 0 - 30 mm, 0 - 1.2 inches

  2. Right: 0 - 30 mm, 0 - 1.2 inches

  3. Bottom: 0 - 30 mm, 0 - 1.2 inches

  4. Left: 0 - 30 mm, 0 - 1.2 inches

  1. Press [Edit].

    Operation panel screen illustration

  2. Press [Scan Position].

  3. Specify the scanning position for the front side of the original.

    Operation panel screen illustration

  4. Specify the scanning position for the back side of the original. Then press [OK].

    If you don't need to set the scanned position of the back side of the original, press [OK].

Note