Skip headerimage
ManualsContentsPreviousNextHelp

Preset Reduce/Enlarge

This function allows you to reduce or enlarge images by selecting a preset ratio.

You can register up to two frequently used reproduction ratios other than the preset Reduce/Enlarge ratios.

Illustration of Preset Reduce/Enlarge

Base Point

The base point of Reduce/Enlarge differs depending on how the original is scanned. When the original is placed on the exposure glass, the upper left corner will be the base point. When it is placed in the ADF, the upper right corner will be the base point.

Illustration of base point

  1. Base point when placed on the exposure glass

  2. Base point when placed in the ADF

  1. Press [Reduce / Enlarge].

    Operation panel screen illustration

    To select a preset ratio on the initial display, press the shortcut reduce/enlarge key.

  2. Select a ratio, and then press [OK].

    Operation panel screen illustration

  3. Place the originals, and then press the [Start] key.

Note

Reference