Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N
ContentsPreviousNextHelp

Top Page > Preparing for Printing > Paper > Paper Handling Precautions > Correct Orientation of Pre-printed Paper When Loaded in the Bypass Tray

Correct Orientation of Pre-printed Paper When Loaded in the Bypass Tray

Load paper print side up, shorter edge pointing in the paper feed direction.

Set paper according to the orientation of the print image, as follows.

Illustration of Loaded in the Bypass Tray

  1. To print over a portrait image:

    Load paper so that its top edge is pointing in the paper feed direction.

  2. To print over a landscape image:

    Load paper so that its right edge is pointing in the paper feed direction.

TopPreviousNext
Copyright (C) 2008,2009