Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N
ContentsPreviousNextHelp

Loading Paper into Tray 1

Follow the procedure below to load paper into tray 1.

A4/Letter size paper is loaded here.

Important

  1. Hold the Tray 1 grip, pull the tray halfway out, lift it slightly (1), and then pull it out further (2).

    tray 1 illustration

    Pull tray 1 completely out. Take care not to drop it.

  2. While squeezing the catch on the paper guide, slide the guide so it is positioned according to the paper size.

    paper guide illustration

    Beforehand, make sure to squeeze the front end paper guide, and then expand the guide.

  3. Load paper with the print side face down but not over the limit mark.

    tray 1 illustration

  4. Squeeze the front end paper guide, and then slide it to meet the edge of the paper.

    paper guide illustration

  5. Push tray 1 gently in until it stops.

    tray 1 illustration