Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N
ContentsPreviousNextHelp

Installing the Print Cartridges

CAUTION


  • If ink comes into contact with your eyes, rinse immediately in running water. For other symptoms, consult a doctor.

  • If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor immediately.

  • If your skin comes into contact with ink, wash the affected area thoroughly with soap and water.

  • Keep the ink or ink container out of reach of children.

Important

  1. Remove the packaging from the print cartridges.

    Do not touch the ink supply ports or silicon substrates of print cartridges.

  2. While pressing the recessed area (1) of the right front cover, open the cover (2).

    printer body illustration

  3. Check the orientation of each cartridge, and then install them gently.

    printer body illustration

    Install in the following order from the left: black, cyan, magenta, and yellow.

  4. Push in each cartridge.

  5. Repeat steps 3 to 4 for all four cartridges.

  6. Close the right front cover.

    printer body illustration