Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N
ContentsPreviousNextHelp

Top Page > Read This First > Guide to Components > Control Panel > Adjusting the Angle of the Control Panel

Adjusting the Angle of the Control Panel

You can adjust the angle of the control panel for easier usage.

Use the following procedure to adjust the angle of the control panel.

Raising the Control Panel

  1. Raise the control panel by carefully pulling it upward and forward.

    control panel illustration

  2. Insert the stopper on the back of the control panel into one of the grooves beneath.

Lowering the Control Panel

  1. Carefully pull the control panel slightly forward (1).

    control panel illustration

  2. Lower the control panel (2).

    Note

    • You can set the tilt to one of three angles.

TopPreviousNext
Copyright (C) 2008,2009