Skip header
Screen reader supported pageStandard
 

Top Page > Preparing for Printing > Setting Up the Hardware > Installing the Print Cartridges

Installing the Print Cartridges

CAUTION

  • If ink comes into contact with your eyes, rinse immediately in running water. For other symptoms, consult a doctor.

  • If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor immediately.

  • If your skin comes into contact with ink, wash the affected area thoroughly with soap and water.

  • Keep the ink or ink container out of reach of children.

Important

  • Do not turn the machine on until you have read how to do so.

    printer body illustration

  • Be sure to install the unused print cartridge that is supplied. Installing any other cartridge could result in incomplete ink filling and malfunction.

1Remove the packaging from the print cartridges.

Do not touch the ink supply ports or silicon substrates of print cartridges.

2While pressing the recessed area (1) of the right front cover, open the cover (2).

printer body illustration

3Check the orientation of each cartridge, and then install them gently.

printer body illustration

Install in the following order from the left: black, cyan, magenta, and yellow.

4Push in each cartridge.

5Repeat steps 3 to 4 for all four cartridges.

6Close the right front cover.

printer body illustration