Skip header
Screen reader supported pageStandard
 

Top Page > Preparing for Printing > Setting Up the Hardware > Checking the Supplied Items and Unpacking the Printer

Checking the Supplied Items and Unpacking the Printer

CAUTION

  • The machine weighs around 13.6 kg (30.0 lb) (16.1 kg (35.5 lb) with options installed).

  • Careless handling and over exertion when lifting can result in breakage and/or injury.

Important

  • Do not turn the machine on until you have read how to do so.

    printer body illustration

Open the box and take out all supplied items. Check that all the following items are present:

1Take off the protective covering.

2Remove the plastic bag.

3Lift the printer and move it to the place where you want to install it.

Grip the indented area at the base of the printer's sides, as shown. Lift and carry the printer slowly and carefully.

moving the printer illustration

4Remove the orange tape from the printer body.

Note

  • We recommend you keep the box, so you can use it again when relocating the printer.

  • Remove all the orange tape, except the tape around the power cord.

  • USB and LAN cables are not supplied.