Skip header
For screen readerStandard Web browser page
 

Top Page > Preparing for Printing > Connecting the Computer and Installing the Software (USB Connection) > Before Installing the Software (USB) > Connecting the Printer via USB

Connecting the Printer via USB

  1. Make sure the printer is off.

    Do not turn the printer on until you have read how to do so.

    printer body illustration

  2. Turn on the power of the computer, and start Windows.

  3. Remove the seal on the USB slot located on the rear of the printer, and then insert the USB cable's hexagonal (type B) plug firmly into the slot.

    USB slot illustration

  4. Insert the USB cable's rectangular (type A) plug firmly into the computer's USB slot.

Note

  • Insert the USB cable's plug with the USB mark facing down.

  • Make sure that the USB cable is fully inserted.

  • Make sure the USB cable is connected properly, especially when the bypass tray is attached to the printer, because the tray makes connecting the cable difficult.