Skip header
 

Top Page > Troubleshooting > When the Machine Does Not Operate As Wanted > Indicators

Indicators

This section describes the indicators displayed when the machine requires the user to remove misfed paper, to add paper, or to perform other procedures.

Indicator

Status

: Misfeed indicator

Appears when a misfeed occurs.

See Removing Jammed Paper.

: Load Paper indicator

Appears when paper runs out.

See "Loading Paper", About This MachineIllustration indicating book format instructionsIllustration indicating instructions stored on a CD-ROM.

: Add Toner indicator

Appears when toner runs out.

See "Adding Toner", About This MachineIllustration indicating book format instructionsIllustration indicating instructions stored on a CD-ROM.

: Add Staple indicator

Appears when staples run out.

See "Adding Staples", About This MachineIllustration indicating book format instructionsIllustration indicating instructions stored on a CD-ROM.

: Waste Toner Full indicator

Appears when the waste toner bottle is full.

Contact your sales or service representative.

: Empty Hole Punch Receptacle indicator

Appears when the hole punch receptacle is full.

See Removing Punch Waste.

: Empty Waste Staple Receptacle indicator

Appears when the waste staple receptacle is full.

See Removing Staple Waste.

: Service Call indicator

Appears when the machine is malfunctioning or requires maintenance.

: Open Cover indicator

Appears when the front cover, etc., is open.