Skip header
 

Installing the PostScript 3 Printer Driver (Windows 2000 - IPP)

Important

  • Installing this printer driver requires Administrators permission. Log on using an account that has Administrators permission.

1Quit all applications currently running.

2Insert the CD-ROM into the CD-ROM drive.

The installer starts.

3Select an interface language, and then click [OK].

The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.

4Click [PostScript 3 Printer Driver].

Add Printer Wizard starts.

5Click [Next >].

6Click [Local printer attached to this computer], and then click [Next >].

7Click [Create a new port:].

8Click [DeskTop Binder - SmartDeviceMonitor], and then click [Next >].

9Click [IPP].

10In the [Printer URL] box, enter "http://(machine's IP address or host name)/printer" as the machine's address.

If the server authentication is issued, to enable SSL (a protocol for encrypted communication), enter "https://(machine's IP address or host name)/printer" (Internet Explorer 5.01, or a higher version must be installed).

(example IP address: 192.168.15.16)

http://192.168.15.16/printer

https://192.168.15.16/printer

You can enter "http://machine's IP address or host name/ipp" as the machine's address.

If the address is "192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.

11Enter a name for identifying the machine in [IPP Port Name]. Use a name different from the name of any existing port.

If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name.

12Click [Detailed Settings] to configure proxy server, the IPP user name and other settings. Specify the necessary settings, and then click [OK].

For information about the settings, see DeskTop Binder-SmartDeviceMonitor for Client Help.

13Click [OK].

14Check that the name of the machine whose driver you want to install is selected, and then click [Next >].

15Change the machine name if you want, and then click [Next >].

Select the [Yes] check box to configure the machine as default.

16Specify whether or not to share the machine, and then click [Next >].

17Specify whether or not to print a test page, and then click [Next >].

18Click [Finish].

The printer driver installation starts.

Note

  • A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.

  • Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the CD-ROM root directory.