Skip headerimage
ManualsContentsPreviousNextHelp

Settings That Can Be Changed on Each Tab

The following is an overview of the settings that are available on the [Edit] tab, [Finishing], [Cover/Slip Sheet], and [Misc.] tabs.

[Edit] tab

  • Layout/Poster/Imposition

    • Speed

    • Double

    You can use an imposition setting to reduce print costs by trimming the printed sheets into several pages.

[Finishing] tab

You can enable/disable collate, staple, punch, and fold function.

  • Collate

    When printing multiple sets of documents such as handouts for meetings, you can have prints delivered in batches of ordered sets.

  • Staple

    With an optional finisher installed, sets can be stapled individually when printing multiple sets.

  • Punch

    With an optional finisher and punch unit installed, holes can be punched into printed outputs.

  • Fold

    With an optional multi-folding unit installed, output can be folded.

[Cover/Slip Sheet] tab

You can enable/disable the collate function.

  • Cover sheet/ Back Cover

    Using this function, you can insert cover sheet/ back cover sheet fed from a different tray to that of the main paper, and print on them.

  • Chaptering

    The specified page is printed on the same side as the first page, like a book.

  • Slip sheet

    A slip sheet can be inserted between each page.

[Misc.] tab

You can change various settings for spool printing and other print options.

  • Spool printing

    The print job is transmitted to the machine and temporarily stored when printing.