Skip headerimage
ManualsContentsPreviousNextHelp

Using as a NetWare Print Server/Remote Printer

This describes how to set up the Windows computer used as the NetWare client.

Important

The following explanation assumes NetWare Client is installed on the client computer and the NetWare server environment is correctly set up. Install all necessary client applications before following this procedure.

Set up the printer driver while logging on to the NetWare file server.

The following values are used in the example:

  1. Insert the CD-ROM into the CD-ROM drive.

    The installer starts.

  2. Select an interface language, and then click [OK].

  3. Click [PCL/RPCS Printer Drivers].

  4. The software license agreement appears in the [License Agreement] dialog box.

    After reading the agreement, click [I accept the agreement.], and then click [Next >].

  5. Select the printer driver you want to use in the [Select Program] dialog box.

    You can select several printer drivers.

  6. Click [Next >].

  7. Select the [Printer Name] check box to select the machine model you want to use.

    The machine name can be changed in the [Change settings for 'Printer Name'] box.

  8. Double-click the machine name to display the printer settings.

    The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, machine model, and port.

  9. Click [Port], and then click [Add].

  10. Click [Network Printer], and then click [OK].

  11. Double-click the name of the NetWare file server on the network tree.

    The created queue is displayed.

  12. Select the print queue, and then click [OK].

  13. Check that the port of the selected printer is displayed in [Port].

  14. Click [Continue].

    The printer driver installation starts.

  15. Click [Finish] in the [Select Program] dialog box.

  16. After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

    Restart the computer to complete installation.

  17. After restarting the computer, open the printer properties from the [Printers and Faxes] window.

    Under Windows 2000/Vista or Windows Server 2003/2003 R2/2008, launch the [Printers] window, and then open the printer properties.

  18. Click the [NetWare setting] tab.

    Under Windows 2000/Vista or Windows Server 2003/2003 R2/2008, on the [Printer Settings] tab, clear the [Form Feed] and [Enable Banner] check boxes.

    Do not select these check boxes since they are automatically selected by the printer driver. If you select the check boxes, the printer may not print correctly.

  19. Click [OK] to close the printer properties dialog box.

Note

Related topics

Form Feed
Banner Page
Printing after Resetting the Printer