Skip headerimage
ManualsContentsPreviousNextHelp

Installing the PCL or RPCS printer driver

  1. Quit all applications currently running.

  2. Insert the CD-ROM into the CD-ROM drive.

    The installer starts.

  3. Select an interface language, and then click [OK].

  4. Click [PCL/RPCS Printer Drivers].

  5. The software license agreement appears in the [License Agreement] dialog box.

    After reading the agreement, click [I accept the agreement.], and then click [Next >].

  6. Select a printer driver you want to use in the [Select Program] dialog box.

    You can select several printer drivers.

  7. Click [Next >].

  8. Select the machine model you want to use.

    The machine name can be changed in the [Change settings for 'Printer Name'] box.

  9. Double-click the machine name to display the printer settings.

    The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, machine model, and port.

  10. Click [Port], and then click [Add].

  11. Click [Standard TCP/IP Port], and then click [OK].

    Configure the Standard TCP/IP port settings, and then see Windows Help if [Standard TCP/IP Port] does not appear.

  12. Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

  13. Enter the machine name or IP address in the [Printer Name or IP Address] box.

    The [Port Name] text box automatically obtains a port name. Change this name if necessary.

    When the device selection appears, select "RICOH NetworkPrinter Driver C Model".

  14. Click [Next >].

  15. Click [Next >].

  16. Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

    The installation start dialog box reappears.

  17. Check that the port of the selected printer is displayed in [Port].

  18. Configure the default printer as necessary.

  19. Click [Continue].

    The printer driver installation starts.

  20. After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

    Restart the computer to complete installation.

Note