Model-Specific Information

In this manual, model-specific information is indicated by the following marks:

Indicates information that is specific to the 220 to 240 V model.

Indicates information that is specific to the 120V model or 208 to 240 V model.

To identify the model, open the bypass tray, and then check the label on the right side of the machine.
Dimensions in this manual are given in two units of measure: metric and inch. If your machine is the 220 to 240 V model, refer to the metric units. If your printer is the 120V model or 208 to 240 V model, refer to the inch units.