Skip header
 

Setting the Paper Size Using the Control Panel

Follow the procedure below to set the machine using the control panel when loading standard size paper onto the bypass tray.

Important

  • The following procedures are not required if you select [Driver / Command] from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see "System"). In that case, set the paper size using the printer driver.

  • Under [Printer Features], [System], if you set [Bypass Tray Setting Priority] to [Driver / Command], paper size settings made on the printer driver must match those made on the control panel. If they do not match, an error message appears and printing stops if [Printer Features], [System], [Auto Continue] is not set. For details about [System] settings, see "System"

1Press the [User Tools/Counter] key on the control panel.

User Tools/Counter key illustration

2Press [System Settings].

Operation panel screen illustration

3Press the [Tray Paper Settings] tab.

4Press [Printer Bypass Paper Size].

Operation panel screen illustration

5Select the paper size.

Operation panel screen illustration

6Press [OK].

7Press the [User Tools/Counter] key.

The initial screen appears.

Note

  • When loading thick paper or OHP transparencies, set paper size and paper type.

  • [Auto Detect] is the default setting for [Printer Bypass Paper Size].

  • For details about setting printer drivers, see the printer driver Help.